MT2HC
MT2HC: Two-axis motor control system at 3A with current control and USB interface
The axis control system MT2HC is a unit, available either in board and in box version, capable of controlling two stepper motor either bipolar and unipolar.
The system is also equipped with four inputs and two opto-isolated digital outputs that can be used to manage via software its limit home detectors, and / or to interface to a PLC or other logic devices.
Motor control and configuration of the system is achieved via USB interface, easily managed using the driver provided with.
The rotation speed of the motors can be independently and easily configured to suit your needs.
MT2HC system also has a current PWM control on the motor phases so as to keep the excitation current to 3A.
The system manages at the start and at the end of the movement an acceleration and deceleration ramp, programmable by the user.
The system comes with demo software and driver interface for Windows, compatible with all recent operating systems (including Windows Vista and Windows 7 either 32-bit and 64-bit ones).
Power supply: logic self -powered directly from the USB port of the computer
Motor power supply: max 15 VDC with current control
Motor steady current: :3A/phase, with PWM control
Communication interface: USB 2.0 (B type connector)
Board dimensions: 115 mm x 115 mm (4,53 x 4,53 inches)
Box Version
Box power supply: 100~250VAC or 140~350VDC
Box dimensions: 203 mm x 133 mm x 279 mm (8.0 x 5.2 x 11.0 inches).
Technical features of inputs
Number of inputs: four
Maximum applicable voltage: 36V
Protection: optocouplers with 2.500Vrms maximum operative voltage
LOW logical level: <1V
HIGH logical level: >2.5V
Input impedance: 2.5 Kohm (about)
Technical features of outputs
Number of outputs: two
Maximum applicable voltage: 36V
Maximum current on each open collector: 150 mA
Protection: optocouplers with 2.500Vrms maximum operative voltage